Black Box ServSelect KV119A, Installer/User Manual

Page: 48 / 84

CHAPTER 6: SCPS COMMANDS
47
Port Alert Add Command Parameters
Parameter Description
< port > Port number in the range 1-8 for an SCPS-8 or 1-16 for an
SCPS-16.
< string > 3-32 character string.
Port Alert Copy command
The Port Alert Copy command copies the alert strings from one port (n2) to another
(n1). Any alert strings that were previously defined on port n1 will be deleted. When
you enter this command, you are asked to confirm or cancel the copy operation.
For more information, see Managing SNMP Structures in Chapter 4.
Access: SCON
Syntax
PORT <
n1
> ALERT COPY <
n2
>
Port Alert Copy Command Parameters
Parameter Description
< n1 > Port number where alert strings will be copied, in the range
1-8 for an SCPS-8 or 1-16 for an SCPS-16.
< n2 > Port number from which alert strings will be copied, in the
range 1-8 for an SCPS-8 or 1-16 for an SCPS-16.
Example
The following command copies the alert strings defined on port 1 to port 7,
replacing any previously-defined alert strings on port 7.
port 7 alert copy 1
Port Alert Delete command
The Port Alert Delete command deletes one or more alert strings from a port. When
you issue this command, a numbered list of defined alert strings is displayed, from
which you choose those to be deleted. You may enter one or more numbers
separated by commas, a range of numbers separated by a hyphen or type ALL to
specify all strings. Pressing Enter cancels the command.
For more information, see Managing SNMP Structures in Chapter 4.
Access: SCON