Bio-Tek ELx405, Operator'S Manual

Page: 89 / 250

Wash
|
59
Define Wash DISPENSE (DISP) Program Options, Cont’d
Option & Description Models Action/Comments
Prime Volume
The volume of the buffer
or rinse used to prime the
dispense tubes.
All The volume range is 1 to 999 ml.
Prime Flow Rate
The rate at which the
priming fluid is dispensed
from the tubes during the
prime.
All The flow rate options range from 1 to 9,
where 1 = Slowest, 9 = Fastest.
Press Main Menu to save All Select YES to save the program.
Wash DISPENSE (DISP) Defaults and Ranges
Parameter Units Default Range Models
50-3000 ELx405, Magna, Select,
Select CW, HT/96-tube
Dispense Volume
(In a Dispense-only
program, the default
volume is 250.)
µ l/well 300
25-3000 HT/192-tube
1-9 All Dispense Flow Rate 5
Additional
flow rates
10 and 11
Select CW
Vacuum on Volume
(Appears only in the
Select CW if Flow
Rates 10 or 11 were
selected.)
µ l/well 10 50-3000 Select CW
Dispense Height See note
below.
120 12-180 All
Notes:
•
Dispense Flow Rate - Select CW : Flow rates 10 and 11 are not recommended
for 384-well plates.
•
Dispense Height : The display shows the corresponding measurement in mm.
Although the range is 12-180, the recommended highest value is 175 .
ELx405 Operator's Guide