Bio-Tek ELx405 Operator'S Manual Download

Page: 134 / 250

104

Chapter 4: Preventive Maintenance

Required Materials

For rinsing/soaking the fluid path, and for cleaning the components:

•

Deionized or distilled water

•

Sodium hypochlorite (NaClO or bleach)

•

70% isopropyl alcohol (or ethanol)

•

Dispense and aspirate tube styluses (supplied with the washer)

•

Phillips head screwdriver

•

9/64” (3.57 mm) hex wrench (supplied with the washer)

•

Lint-free disposable towels

•

Dish soap or other mild cleaner

•

Soft-bristled brush

For replacing o-rings and channel-end seals:

•

O-rings (PN 49941)

•

Channel-end seals (PN 49486)

In the following cleaning procedures, when not otherwise specified,

“water” means use either deionized or distilled water.

Unless otherwise instructed,

always

connect a supply bottle

containing deionized or distilled water to the washer before running

the Maintenance programs.

Bio-Tek Instruments, Inc.

Summary of Contents for ELx405



























































































































































































































































Search results

Summary of Contents for ELx405

Reviews:

Related manuals for ELx405

Brands by name

Popular brands

Bio-Tek ELx405, Operator'S Manual

Search results

Summary of Contents for ELx405

Reviews:

Related manuals for ELx405

Brands by name

Popular brands