Bio-Tek ELx405, Operator'S Manual

Page: 17 / 250

Revision History
|
xv
Revision History
Rev Date Changes
A 12/98 • Release to Production.
B 3/99 • Replaced graphic of the Magna carrier placement to clarify position. Added
defaults and ranges for Method, Dispense, Aspirate, Prime and Soak
parameters.
C 02/00 • Updated contact information under Notices. Added “patented” to all
references to the “dual-manifold design.” Enhanced the Maintenance and
Instrument Verification chapters.
D 6/00 • Corrected default prime dispense volume. Added new error code A900.
Added info on pump for testing 384-well plates.
E 3/03 • Updated contact information, standards, and safety symbols in Preface.
Added Cautions to Precautions section: Chemical Compatibility, Bovine
Serum Albumin, Shipping Bracket, Waste Monitor Sensor Connector.
• Revised hardware/software features, package contents, optional
accessories, and specifications in Ch. 1. Moved Technical Support section
from App. A to Ch. 1, and updated TAC addresses, phone numbers, etc.
Included information about compatibility of ELx405  Auto Plate and Select
models with Bio-Stack  Microplate Stacking System in Ch. 1.
• Added brief paragraphs in Ch. 2 & 3, App. A & B regarding installation,
operation, troubleshooting, error codes when operating with Bio-Stack;
referenced Bio-Stack Operator’s Manual.
• Updated Ch. 3 screens, descriptions of program options, and menu maps to
reflect New/Repeat options at program completion and additional 4 aspirate
rates (for Aspiration and Wash programs); added new sections to Setup
Utilities about the Bio-Stack, delay after dispense, plate clearance height,
and vacuum dissipation delay options.
• Updated maintenance and IQ-PQ-OQ chapters.
ELx405 Operator's Guide