Bio-Tek ELx405, Operator'S Manual

Page: 119 / 250

Linking Programs
|
89
Define Link Program
To define a Link program, follow the menu path shown below. Some of these items
are options and some are prompts. The options are described in the table below:
DEFINE SELECT ACTION CREATE SELECT PROGRAM TYPE
MORE LINK NAME PLATE TYPE SELECT LINK 01 TYPE :
SELECT LINK 02 TYPE : SELECT LINK 03 TYPE : (UP TO 10)
OK TO SAVE PROGRAM?
PLATE TYPE only appears on the Select, Magna, Select CW, and HT models with
the accessory 96-tube manifold installed.
Define Link Program Options
Option & Description Models Action/Comments
Name
Enter a unique name for
the new Link program.
All Use up to 16 alphanumeric characters.
See
Entering Program Names on page
44 for instructions.
Select,
Select CW,
Magna,
HT/96-tube
Choose 96 or 384.
Note: For higher throughput of the HT
with 384-well plates, use the 192-tube
manifold.
Plate Type
Specify the microplate
type.
Magna Choose 96 or 96Bead.
Select Link (n) Type
Select each Wash, Prime,
Dispense, Aspirate,
and/or Soak program to
be included in the Link
program.
All Programs will be run in the order in which
they are selected.
If the
Plate Type option is presented
(see above), then only programs with the
selected Plate Type will be accessible for
inclusion in the Link program.
Press Main Menu to save . All Select YES to save the program.
ELx405 Operator's Guide