Bio-Tek ELx405, Operator'S Manual

Page: 137 / 250

Prime Programs
|
107
Prime Programs
Each pre-defined Maintenance program runs a pre-defined Prime program . The
charts below and on the following page show the default prime program parameters.
These parameters can be modified.
To
view or edit the parameters for a particular Prime program, follow this sequence
from the washer’s main menu:
DEFINE EDIT PRIME SELECT PRIME PROGRAM
(press the Options key to cycle through the available programs)
Refer to
Chapter 3
,
Define Prime Program
for more information on Prime programs
and their parameters.
Note: In addition to the tubing that every ELx405  Washer model is
equipped with, the Select CW model contains smaller diameter “low flow”
tubing for gentle cell washing. The Low Flow Prime Volumes specified in
the charts below and on the following page are necessary to purge the
Select CW’s low flow tubing.
Maintenance Program:
DAY_RINSE
Prime Program:
P_DAY_RINSE
Parameter Default Selectable Range
Prime Volume
400 ml (All models except Select CW);
300 ml (Select CW)
1-999 ml
Low Flow Prime Volume
(Select CW models only)
200 ml 1-999 ml
Flow Rate 7 1-9
Soak After Prime? No; N/A for the Select CW Yes/No
Maintenance Program:
OVERNIGHT_LOOP
Prime Program:
P_RINSE_LOOP
Parameter Default Selectable Range
Prime Volume
60 ml (All models) 1-999 ml
Low Flow Prime Volume
(Select CW models only)
0 ml 1-999 ml
Flow Rate 7 1-9
Soak After Prime? Yes Yes/No
Soak Duration 4 hours 1 minute to 18 hours
ELx405 Operator's Guide