Bio-Tek ELx405, Operator'S Manual

Page: 109 / 250

Dispense
|
79
Dispense
This section discusses how to run, define, edit, copy and delete Dispense programs.
(See
Appendix D
,
Default Programs
for a list of default Dispense programs.)
Run Dispense Program
Important! Before running a Dispense program, ensure that you
have reviewed the
General Usage Guidelines
on page 49 and
that the microplate is properly seated in the plate carrier.
To run a Dispense program, follow the menu path shown below. Some of these
items are options and some are prompts. The options are described in the table
below:
RUN SELECT PROGRAM TYPE DISP SELECT DISP PROGRAM
PRIME THE WASHER? NUMBER OF STRIPS
PLACE PLATE IN CARRIER AND PRESS <START> KEY
DISPENSE PROGRAM RUNNING. PRESS <STOP> KEY TO QUIT
DISP PROGRAM COMPLETE. NEW REPEAT
Run Dispense Program Options
Option & Description Models Action/Comments
Select Disp Program
Select a Dispense
program.
All
Press the Options key to cycle through
the available Dispense programs.
New/Repeat All Select NEW to start a new program or
REPEAT to repeat the last one.
ELx405 Operator's Guide