84
Configuring Protocols
V!CAS
MODEM
At the moment this menu only contains the
sub-
menu, where you can configure up to eight different modem profiles.
The modem profiles can be associated with the Called Party’s Number
of incoming calls in the [CM-1BRI] [Incoming Call Answering] menu. Thus,
using your available MSNs, you can create separate profiles to support
the analog equipment your remote access users (dial-up clients) will be
calling from.
In theory you could use only one profile, where all values are set to
maximum—or auto, where applicable—and let the calling modem nego-
tiate the values it needs.
This will work in most cases—only older modems will be unable to
negotiate the necessary values—but will require more time to negotiate
the connection parameters at connect time. After starting the Setup Tool,
go to the [MODEM] [Profile Configuration] menu, and select Profile 1.
You must ensure that the modem settings correspond to the type of
fax/modem provided by your V!CAS. The settings are shown below
should be fine for 14400 modems.
V!CAS Setup Tool
BinTec Communications GmbH
[
MODEM
][
PROFILE
][
EDIT
]
: Configure Profile
vicas
Name
Profile 1
Description
Modulation
V.32bis
Error Correction
LAPM
Automode
on
Min Bps
300
Max Receive Bps
14400
Max Transmit Bps
14400
V.42bis Compression
auto
MNP5 Compression
auto
SAVE
CANCEL
Enter string, max length = 48 chars
MODEM
P
ROFILE
C
ONFIGURATION
