Configuring Protocols
69
User’s Guide: Version 1.2
ipx
The IPX Configuration menu is used to set global parameters for the IPX
protocol. These settings apply to all IPX interfaces.
Local System Name
= Defines the IPX system name used by the
V!CAS. The name may not contain underscores, exclamation marks,
or dots, and must be in uppercase.
Internal Network Number
= The V!CAS’ internal network number.
This value must be unique among all network numbers and defaults
to the last 4 bytes of the MAC address of your V!CAS. Change only if
this value conflicts with a remote IPX router’s net number.
enable IPX spoofing
= Set to “yes” or “no” to enable/disable NCP
session watchdog spoofing and handling of ‘broadcast message wait-
ing’ packets.
enable SPX spoofing
= Set to “yes” or “no” to allow/disallow spoof-
ing of SPX session watchdog packets. Enable this if you are using SPX
sessions over WAN links.
NetBIOS Broadcast replication
= Defines how NetBIOS packets are
used.
V!CAS Setup Tool
BinTec Communications GmbH
[
IPX
]
:
IPX Configuration
vicas
Local System Name
BRICK
Internal Network Number
f9000e91
enable IPX spoofing
yes
enable SPX spoofing
yes
NetBIOS Broadcast replication
yes
SAVE
CANCEL
Enter string, max length = 35 chars
IPX
