78
Configuring Protocols
V!CAS
x25.mpr.add
Use this menu to add or change MPX25 interfaces.
Partner Name
= Enter a unique name to identify this MPX25 partner.
Enabled Protocols
= “X” selects the protocols that can be routed (re-
ceived/transmitted) with this partner.
Encapsulation
= Depending on which protocol(s) are enabled for this
partner, select the type of encapsulation to use. Note that the remote
MPX25 partner must be configured to use the same encapsulation.
X.25 Destination Address
=The X.25 address for this partner. There
must be an appropriate X.25 route for this address in the X.25 routing
V!CAS Setup Tool
BinTec Communications GmbH
[
X.25
][
MPR
][
ADD
]
: Add or change X.25 MPR
vicas
Partner Name
mpxpartner1
Enabled Protocols
<X> IP < > IPX < > BRIDGE
Encapsulation
ip_rfc877
X.25 Destination Address
49911555
IP >
IPX >
Advanced Settings >
SAVE
CANCEL
Enter string, max length = 25 chars
Encapsulation
Protocol
ip_rfc877
IP
ip
mpr
IPX
Br
idge
ipx
X.25
M
ULTIPROTOCOL OVER
X.25
ADD
