Configuring Protocols
61
User’s Guide: Version 1.2
ip.nat.add
This menu is used to add or change session profiles for a NAT interface.
Sessions configured here define the types of IP session(s), that are explic-
itly allowed over this NAT interface. The session profile configured here
applies to a specific host.
Service
= The service to allow on the internal host. Several services
are already defined. To define other services, set to “user-defined” and
set the Protocol and Port fields appropriately.
Protocol
= The protocol to allow for user-defined services.
Port
= The port number to allow. Use “-1” to allow all ports for the
specified protocol. If a specific port is set, it must match the port
number used by the internal host.
Destination
= IP address of the internal host to allow connections to.
Leaving this field empty identifies the V!CAS as the destination host.
Select
to accept the session profile and return to the previ-
ous menu.
Select
to abort the entries made so far and return to the
previous menu.
V!CAS Setup Tool
BinTec Communications GmbH
[
IP
][
NAT
][
CONFIG
][
ADD
]
: Edit NAT Configuration (en1)
vicas
Service
user defined
Protocol
icmp
Port (-1 for any)
-1
Destination
SAVE
CANCEL
Use <Space> to select
IP
Network Address Translation
ADD
SAVE
CANCEL
