Declarations
FCC Notice — Class A Computing Device
This equipment has been tested and found to comply with the limits for a class A digital
device, pursuant to Part 15 of the FCC Rules and CSA Regulation C 108.8. These limits are
designed to provide reasonable protection against harmful interference in a commercial
environment. This equipment generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may cause harmful in-
terference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference which the user will be required to correct at his/her
own expense.
FCC Notice — Class B Computing Device
NOTE
: This equipment has been tested and found to comply with the limits for a class B
digital device, pursuant to Part 15 of the FCC Rules and meets all requirements of the Ca-
nadian Interference-Causing Equipment Regulations. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equip-
ment generates, uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communica-
tions. However, there is no guarantee that interference will not occur in a particular instal-
lation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment on and off, the user is encouraged to
try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected
• Consult the dealer or an experienced radio/T.V. technician for help.
The use of a non-shielded interface cable with the referenced device is prohibited. Changes
or modifications not expressly approved by BinTec Communications GmbH could void
the authority to operate the equipment.
CE Notice
The
symbol means that the V!CAS adheres to the EMV (89/336/EWG) and voltage
(73/23/EWG) guidelines defined by the European Community.
Euro-Numeris
In addition to the guidelines defined by the EC, the V!CAS also adheres to
ISDN requirements in France and may be connected to Euro-Numeris.
GS
The GS (Geprüfte Sicherheit) symbol means that the V!CAS adheres to the standards de-
fined by the German safety regulations.
ISDN Ordering Codes (IOC) for the U.S.A.
V!CAS operates with the following IOCs:
Capability Package ’S’
and
EZ-ISDN-1
