74
Configuring Protocols
V!CAS
x25.linkconfig.edit
This menu is used to configure the basic characteristics of the X.25 link.
Link
= This is the name of the link your are editing and cannot be
changed here.
L3Mode
= This defines the mode the V!CAS operates in at Layer 3 of
the X.25 protocol stack. Set to DCE if the V!CAS must provide clocking
information or DTE if provided by the remote side of link.
Lowest Two-Way-Channel (LTC)
= LTC and HTC must be set to re-
flect the number of Virtual Channel(s) you have arranged for from
your X.25 network provider.
Highest Two-Way-Channel (HTC)
= Defines the highest number that
can be assigned to a Virtual Channel.
Partner MAC Address (LLC)
= Used when configuring a link for a
partner on the LAN and specifies the host’s MAC or hardware ad-
dress.
Layer 2 Behaviour
= Defines whether (and if so, when) the link
should be disconnected when no virtual channels are active.
Disconnect Timeout
= Time in seconds to wait before closing the link
once the line becomes inactive.
V!CAS Setup Tool
BinTec Communications GmbH
[
X.25
][
LINK
][
EDIT
]
:
Change X.25 Link Configuration
vicas
Link
en1-llc
L3 Mode
dte
L3 Window Size
128 bytes
L3 Packet Size
2
Lowest Two-Way-Channel (LTC) 1
Highest Two-Way-Channel (HTC) 2
Partner MAC Address (LLC)
Layer 2 Behaviour
disconnect after timeout
Disconnect Timeout
1000
SAVE
CANCEL
Use <Space> to select
X.25
L
INK
C
ONFIGURATION
E
DIT
