Basic System Configuration
29
User’s Guide: Version 1.2
system
The System menu contains the V!CAS’ basic system settings. Some fields
are required for the IP and PPP protocols, and others are optional varia-
bles that contain administrative information.
System Name
= Defines the V!CAS’ system name and is used by IP
as the hostname. If the system name is not set, the V!CAS displays a
warning message to the screen when the admin user logs in.
Local PPP ID
= This field is required by the PPP to identify your
V!CAS at connection time for IP partners configured for PAP or CHAP
authentication.
Location
= (optional) The physical location of your V!CAS.
Contact
= (optional) Person responsible for this V!CAS. This text
string must contain a valid email address if the system adminstrator is
to be contaced from the V!CAS’ HTTP status-page.
Login Password/SNMP Community
= These three fields define the
passwords required for the admin, read, and write users. User restric-
tions are shown in the table below.
V!CAS Setup Tool
BinTec Communications GmbH
[
SYSTEM
]
: Change System Parameters
vicas
System Name
vicas
Local PPP ID (default)
vicas
Location
building 14, 3rd floor, room f
Contact
Joe Brick ([email protected])
admin Login Password/SNMP Community
bintec
read Login Password/SNMP Community
public
write Login Password/SNMP Community
public
RADIUS Server Password
HTTP Server Password
bintec
Syslog output on serial console
no
Message level for the syslog table
debug
Maximum Number of Syslog Entries
20
External System Logging >
SAVE
CANCEL
Enter string, max length = 34 chars
S
YSTEM
