148
isdnlogin
V!CAS
isdnlogin
To verify that an ISDN connection can be made you can use the isdnlogin
program. A brief description of this program is in Chapter 7. To establish
an ISDN connection use the isdnlogin program as follows:
isdnlogin
isdn-number
telephony
where the isdn-number parameter is the telephone number of a telephone
in your local office where you can audibly verify the call. The isdn-service
parameter should specifies the ISDN “telephony” service. You can also
verify the call by viewing the isdnCallHistoryTable as explained in the
next section.
bricktrace
You can use the bricktrace utility to inspect and disassemble the data be-
ing sent over the ISDN channels.The bricktrace command will attach to
TCP/IP port 7000, so you must specify the IP address for the host you
wish to trace. This is done with the
-H
hostID parameter or by using a
TRACE_HOST environment variable. For additional information on us-
ing the bricktrace utility, please see chapter 7.
System Errors
If you are having problems in regaining control of the system due to con-
figuration errors or forgotten passwords, you may want to return the
V!CAS to it’s initial configuration state as it arrived. This can be done
from the BOOTmonitor at startup.
I can’t reach the V!CAS via the network.
• If the V!CAS can not be reached over a network connection, you
may need to attach a terminal (or computer running a terminal em-
ulation program) to it directly.
