38
Hardware Interfaces
V!CAS
Item
= the ISDN service you want to use for this call. You can select
one of the following:
Number
= the telephone number to use for this item.
Mode
= the direction for matching the incoming telephone number
(Called Party Number), either starting from the right (right to left, this
is the default), or from the left (left to right (DDI), only useful for the
Direct Dial In (DDI) feature of point-to-point ISDN accesses.
1
1. Called »Anlagenanschluß« in Germany
Value
Meaning
PPP (routing)
Default value, good for all PPP connection
types listed below (except for the specific
PPP Modem Profile 2 … 8 settings) if the calls
are signalled correctly (as is the case in most
of Europe).
If in doubt, try this value.
ISDN Login
login service
PPP 64k
64kbps PPP data connection
PPP 56k
56kbps PPP data connection
PPP Modem
selects Modem Profile 1 as configured in the
[
MODEM
]
menu
PPP DOVB
data transmission over voice bearer; useful
e.g. in the US where voice calls sometimes
cost less than data connections
PPP V.110
(1200 - 38400)
bit-rate adaption according to V.110
(1200 bps, 2400 bps, …, 38400 bps)
Pots
put the call through to the POTS ports
PPP Modem
Profile 1 … 8
selects Modem Profile 1 … 8 as configured in
the
[
MODEM
]
menu
CAPI 1.1 EAZ 0 … 9
Mapping
EAZ mapping for CAPI 1.1 applications
