30
Basic System Configuration
V!CAS
RADIUS Password
= Required for sites using RADIUS servers for user
authentication.
HTTP Server Password
= Required for viewing the HTTP status pages
of your V!CAS. You should change this password from its default val-
ue bintec.
Syslog output on serial console
= Specifies whether to display sys-
tem messages to the console and may be useful when debugging.
Message level for the syslog table
= Specifies a priority level for
messages sent to the console. Only system messages with a priority
less than or equal to this value are displayed. Possible levels include:
1.
Excluding password and license variables.
2.
Changes only saved to memory (lost upon reboot).
Note
:
Since the admin user has complete access to the V!CAS’
configuration information, the admin password should be
protected.
User
Restrictions
Execute shell commands
Read
System
Vars
Set
RW
Vars
Save
Config
Files
admin
System, IP, IPX, ISDN, X.25
✓
✓
✓
write
IP, IPX, ISDN, X.25
✓
1
✓
2
—
read
IP, IPX, ISDN, X.25
✓
1
✓
2
—
Highest priority
debug
DebugEmergency
emerg
Emergency Messages
alert
Alert Messages
crit
Critical Messages
err
Error Messages
warning
Warning Messages
notice
Notice Messages
lowest priority
info
Info Messages
!
