Partner Management
51
User’s Guide: Version 1.2
Dynamic IP-Address Server
= Set to “on” if you want the V!CAS to
assign this partner a fresh IP address at connection time. The next free
IP address is taken from the pool of addresses defined under
. This partner can also—on
request—get its domain name server addresses from the V!CAS.
Layer 1 Protocol
= This entry only has an effect on outgoing calls to
this partner and on incoming calls which are identified by their calling
party number. For an outgoing modem connection you should select
one of the eight modem profiles.
The Layer 1 Protocol for incoming calls not identified by their calling
party number—which will probably the case for most incoming mo-
dem connections, as they usually originate from the analogue tele-
phone network, where no calling party numbers are supplied with the
calls—is taken from the
settings.
The following table shows the possible values for the Layer 1 Protocol
entry.
Note that most entries correspond to similar entries in the Item field
of the
menu explained on page 37.
Value
Meaning
ISDN 64kbps
64kbps ISDN data connection
ISDN 56kbps
56kbps ISDN data connection
Modem
selects Modem Profile 1 as configured in the
[
MODEM
]
menu
DOVB
data transmission over voice bearer; useful
e.g. in the US where voice calls sometimes
cost less than data connections
V.110 (1200 - 38400)
bit-rate adaptation according to V.110
(1200 bps, 2400 bps, …, 38400 bps)
Modem Profile 1 … 8
selects Modem Profile 1 … 8 as configured in
the
[
MODEM
]
menu
IP
D
YNAMIC
IP A
DDRESSES
I
NCOMING
C
ALL
A
NSWERING
☞
I
NCOMING
C
ALL
A
NSWERING
