How do I configure the V!CAS to accept its IP address dynamically?
107
User’s Guide: Version 1.2
How do I configure the V!CAS to accept its IP address dynamically?
The V!CAS can be configured to accept its IP address dynamically (i.e. cli-
ent mode) from an ISDN dialup partner that acts as the IP address server.
ISPs (Internet Service Providers) commonly assign their customers’ IP ad-
dresses dynamically at connection time, allowing them to reduce their re-
quired address space.
Configure it
Configure WAN partner (server)
The WAN partner that assigns the V!CAS’ IP address is configured
just like any other WAN partner with one exception. The following
field must be set to “dynamic”.
IP Transit Network
dynamic
All other settings for this partner are configured as described on page
104.
Add a default route
Next, create a default route for the WAN partner interface.
Route Type
Default route
Network
WAN without transit network
Partner / Interface
<partner interface name>
More Info
In most cases configuring the V!CAS to accept its IP address dynamically
is helpful when NAT is being used. To configure NAT (with or without
dynamic IP address assignment) see page 109.
!
(p. 46)
ADD
WAN P
ARTNER
IP
(p. 55)
IP
R
OUTING
ADD
?
