How do I configure X.25 access for a host on my LAN?
123
User’s Guide: Version 1.2
How do I configure X.25 access for a host on my LAN?
LAN hosts can utilize X.25 WAN links provided by the V!CAS to connect
to remote X.25 hosts. The appropriate WAN links should already be con-
figured. This section describes how to configure the LLC link (X.25 over
ethernet), the local portion of the end-to-end communication link. An
LLC link is specific to a particular LAN host.
Before you begin
Before you start you’re going to need the following information.
• The V!CAS’ X.25 address.
• The LAN partner’s MAC address.
• A locally assigned X.25 address for the LAN partner.
Configure it
Configure X.25 Local Address
First, verify the V!CAS’ local X.25 address is configured.
X.25 Local Address
<V!CAS’ X.25 Address>
Create LAN Host Link
We need to create a new link for the host on the V!CAS’ LAN. Select
the appropriate link template from the list depending on which LAN
this host is on. Ethernet templates have the format:
en<slot>-llc (create new configuration)
X.31 Link
ISDN
X.25 Host
Dialup
ISDN
X.25 Address
LAN Partner
MAC: 0a:0b:0c:0d.0e:0f
FTAM
Local X.25 Address:
en1-llc
✍
!
(p. 72)
X.25
S
TATIC
S
ETTINGS
(p. 73)
X.25
L
INK
C
ONFIGURATION
