Hardware Interfaces
35
User’s Guide: Version 1.2
WAN Interface :
1bri
This menu contains settings for the ISDN interface.
Result of autoconfiguration
= The status of ISDN autoconfiguration
for this interface. The autodetection procedure runs until a successful
detection or the switch type (see below) is set manually.
ISDN Switch Type
= Defines the switch type your ISDN provider
uses. In most cases “autodetect on bootup” will detect the proper
switch type. If the switch type is set manually, the autodetection fea-
ture is disabled for this interface.
The follwoing protocols are supported for dialup and leased lines.
CM-1BRI, ISDN S0
V!CAS Setup Tool
BinTec Communications GmbH
[
WAN
]
: WAN Interface
vicas
Result of autoconfiguration:
Euro ISDN, point to multipoint
ISDN Switch Type
autodetect on bootup
D-Channel
dialup
B-Channel 1
dialup
B-Channel 2
dialup
Incoming Call Answering >
Advanced Settings>
SAVE
CANCEL
Use <Space> to select
ISDN Dialup Lines
ISDN Leased Lines
•
Euro ISDN
•
1TR6
•
AT&T 5ESS Custom ISDN
•
ISDN 1 AT&T NI1, EWSD NI1
•
National ISDN 1 Northern
Telecom DMS100
•
Japan NTT INS64
•
leased line B1 channel (64S)
•
leased line B1+B2 channel (64S2)
•
leased line D+B1+B2 channel (TS02)
