How do I configure ISDN dialup access for an X.25 partner?
125
User’s Guide: Version 1.2
How do I configure ISDN dialup access for an X.25 partner?
This section describes how to configure an ISDN dialup access for an X.25
partner. Here an available ISDN B-channel will be used to transfer X.25
user data with this remote host.
Before you begin
Before you start you’re going to need the following information.
• The V!CAS’ ISDN telephone number and X.25 address.
• The remote X.25 partner’s ISDN telephone number.
Configure it
Configure X.25 Local Address
Verify the V!CAS’ X.25 address is set here.
Edit WAN Partner
Create a new WAN partner interface and enable only X.25 traffic.
Enabled Protocols
<X> X.25
Encapsulation
X.25
Under
set the partner’s ISDN number.
ISDN Number
<the X.25 partner’s ISDN telephone number>
Direction
both
Return to the previous menu and select
.
Note:
If the remote site is another BRICK verify the Incoming Call
Answering settings configured there to ensure this number
will be dispatched to the routing service.
ISDN
X.25 Address
ISDN Telno
ISDN Telno
✍
!
(p. 72)
X.25
S
TATIC
S
ETTINGS
(p. 41)
ADD
WAN P
ARTNER
ISDN N
UMBERS
!
SAVE
