60
Configuring Protocols
V!CAS
ip.nat.edit
The NAT Configuration menu lists session profiles that define which ses-
sion are allowed over this NAT interface. From this menu you can add,
change, or delete session profiles.
Network Address Translation
= The type of NAT to perform for this
interface: “on” for forward NAT, “reverse” for reverse NAT, and “off”
to disable NAT completely.
To edit an existing session, highlight the entry and enter <Return>.
To configure a new session profile for this interface select
.
To delete a session, mark the entry for deletion using the spacebar,
then select
.
Select
to accept the session list and return to the previous
menu.
Select
to discard all changes made since the last SAVE and
return to the previous menu.
V!CAS Setup Tool
BinTec Communications GmbH
[
IP
][
NAT
][
CONFIG
]
: NAT Configuration (en1)
vicas
Network Address Translation
off
Configuration for sessions requested from outside
Service
Destination
Source Dep.
Dest. Dep. Port Remap
ADD
DELETE
SAVE
CANCEL
Use <Space> to select
Note
:
Once saved, any changes made here become effective
immediately. Be aware of this when configuring NAT from
a remote site.
IP
Network Address Translation
E
DIT
ADD
DELETE
SAVE
CANCEL
!
