BelFox 47-21-i, Installation Instructions Manual

Page: 56 / 288

8
2.5.
Safety notices regarding competent / qualified persons, who
may carry out assembly, operation, maintenance, repair and
disassembly
.
The gate drive may only be installed and commissioned by a competent /
qualified person.
In the event of failure or malfunction of the drive, an expert must be di-
rectly commissioned with the inspection / repair.
According to EN 12635, a competent person is a person who has appro-
priate training, qualified knowledge and practical experience to correctly
and safely install, inspect, maintain and repair a gate system. This person
must also ensure that the applicable national regulations on work safety
and regulations for the operation of electrical equipment are observed.
Packaging material should be stored out of the reach of children and dis-
posed of in accordance with applicable national regulations.
You will find the relevant safety information and instructions in the rele-
vant chapters of this manual. Please observe and follow these instructions
to avoid any residual risks.
NOTE! Inform yourself about the prescribed safety devices
based on the EU directives on the safety in use of
power-operated gates.
9
33.. CCiirrccuuiitt ddiiaaggrraam m