Beckman Coulter Power Express Aliquot, Instructions For Use Manual

Page: 72 / 122

Labeler Error Codes (Continued) Table 4.3
Sensor Problem Solution
PS006 PAS
A queued secondary
container above the
rotating table does not
drop down into a holder on
the rotating table.
1. Confirm that a secondary container is not jammed or stuck.
2. If there is a stuck tube, manually drop the tube down the
funnel to activate PS006.
3. Confirm that PS006 turns on when there is a tube in front
of the sensor.
PS024 ON
Failed to retrieve a
secondary container from
the rotating table.
1. Confirm that PS024 works correctly.
2. Manually remove all secondary containers from the
rotating table.
3. Select
Restart
on the control panel to activate the
transfer arm.
Note
Another error occurs when the transfer arm
activates. Inspect the device.
PS024 OFF
Secondary container
detection error. The
transfer arm has retrieved a
secondary container from
the rotating table, but the
sensor at the carrier does
not detect the tube.
1. Confirm that PS024 works correctly.
2. If a secondary container was dropped, pick up the tube and
place it in the carrier at PS024.
PS031 ON
Jammed or stuck secondary
container at the back of the
secondary container supply
box.
Inspect for and remove any jammed or stuck secondary
containers.
PS032 ON
Jammed or stuck secondary
container at the front of the
secondary container supply
box.
Inspect for and remove any jammed or stuck secondary
containers.
PS033 ON
Stuck secondary container
at the tube delivery belt.
1. Inspect for a stuck secondary container on the tube
delivery belt or obstruction around the tube transfer point.
2. If found, push the tube towards the tube transfer point or
remove obstruction.
3. Check for too many secondary containers on the tube
delivery belt. Should be no more than one past FS031. If
found, remove by pushing the tube upwards and place
back into the tube supply bin.
4. If the error still occurs, contact your Beckman Coulter
representative.
Troubleshooting
Error Code Tables
4-12
B31449AE