Beckman Coulter Power Express Aliquot, Instructions For Use Manual, Page: 43 / 122

Module Function Code Definitions (Continued) Table 3.1
Unit Function
Code
Definition
97 Enable/Disable Aliquot Drip Trays:
0 - Enable
1 - Disable only drip tray A.
2 - Disable only drip tray B.
Note
When disabling a drip tray, you must disable the
corresponding Aliquot Nozzle in Line Control.
Note
Disabled drip trays do not run and the system ignores the
associated errors.
Refer to the instructions for enabling and disabling modules in Power
Express General System Operation Instructions for Use.
Contact your Beckman Coulter Field Service Engineer for assistance to
disable drip trays.
Function Code Procedure
1
Select Manual and OK to place the module in Manual mode.
2
Select
Maintenance
on the control panel.
3
Select the number field to display the onscreen keyboard.
4
Enter the function code and select Enter twice to enable the command.
General Error Recovery
When an error occurs at a module, the system activates a flashing beacon and an audible
alarm. The control panel displays the associated error code.
Perform the following procedure when an error occurs on the system.
1
Select
Mute
on the control panel.
2
Refer to the Error Code tables in Chapter 4 of the module-specific IFU for the
corresponding error recovery procedure.
Error Recovery Procedures
Error Recovery General Information
3
B31449AE
3-3