Beckman Coulter Power Express Aliquot, Instructions For Use Manual

Page: 36 / 122

Add Aliquot Sample Tubes
The Labeler applies bar code labels to aliquot sample tubes. If the component does not
detect a aliquot sample tube, the system activates a flashing beacon. The control panel
turns yellow and displays a "Tube Supply" message.
1
Open the aliquot tube supply bin door and check the supply level. Refer to Figure 2.4
Aliquot Tube Supply Bin .
Figure 2.4 Aliquot Tube Supply Bin
1. Aliquot Sample Tube Supply Bin 2. Level View Window
2
Fill the bin to the bottom of the line inside the bin. Do not fill to capacity.
3
Close the door.
4
Select the warning message on the control panel to clear the warning and then resume
operation.
Empty the Defective Secondary Tube Container
When the Labeler applies a label to a secondary sample tube, it checks the bar code. If the
system cannot read the bar code, the Labeler discards the secondary tube into a chute for
disposal in the defective secondary tube container. Check this container periodically and
dispose of the defective tubes.
1
Select Pause on the Labeler control panel to pause the Labeler.
Power Express Aliquot Module Procedures
Add Aliquot Sample Tubes
2-6
B31449AE