Beckman Coulter Power Express Aliquot Page 91 Instructions For Use Manual Download

Page: 91 / 122

Aliquotter Error Codes (Continued)

Table 4.4

Sensor

Problem

Solution

SL031 ON
SL031 OFF
SL032 ON
SL032 OFF
SL033 ON
SL033 OFF

Stopper error. The stopper

is not working correctly.

ON error: The cylinder does
not respond correctly to an
ON signal from a PLC.

OFF error: The cylinder
does not respond correctly
to an OFF signal from a PLC.

1. Confirm that a carrier is not jammed or stuck.
2. Confirm that the air compressor is on and the auto switch

is working correctly.

3. Confirm that the compressed air supply is within the

normal pressure range.

4. Select

Restart

on the control panel to resume

operation.

SL036A ON
SL036B ON

Error at the splash guard

cover on the back of the

module.

1. Inspect for and remove any obstructions.
2. Confirm that the air compressor is on and the auto switch

is working correctly.

3. Confirm that the compressed air supply is within the

normal pressure range.

SL051 ON
SL051 OFF

Error at lateral tube stopper

#1.

ON error: The cylinder does
not respond correctly to an
ON signal from a PLC.

OFF error: The cylinder
does not respond correctly
to an OFF signal from a PLC.

1. Confirm that a carrier is not jammed or stuck and that the

belt moves.

2. Select

Restart

on the control panel to resume

operation.

SL052 ON
SL052 OFF

Error at lateral tube

stopper. #2.

ON error: The cylinder does
not respond correctly to an
ON signal from a PLC.

OFF error: The cylinder
does not respond correctly
to an OFF signal from a PLC.

1. Confirm that a carrier is not jammed or stuck and that the

belt moves.

2. Select

Restart

on the control panel to resume

operation.

SL053 ON
SL053 OFF

Error at tip delivery cylinder

#1.

ON error: The cylinder does
not respond correctly to an
ON signal from a PLC.

OFF error: The cylinder
does not respond correctly
to an OFF signal from a PLC.

1. Confirm that a carrier is not jammed or stuck and that the

belt moves.

2. Select

Restart

on the control panel to resume

operation.

Troubleshooting

Error Code Tables

B31449AE

4-31

Summary of Contents for Power Express Aliquot


























































































































Search results

Summary of Contents for Power Express Aliquot

Reviews:

Related manuals for Power Express Aliquot

Brands by name

Popular brands

Beckman Coulter Power Express Aliquot, Instructions For Use Manual

Search results

Summary of Contents for Power Express Aliquot

Reviews:

Related manuals for Power Express Aliquot

Brands by name

Popular brands