Beckman Coulter Power Express Aliquot, Instructions For Use Manual

Page: 69 / 122

Labeler Error Codes (Continued) Table 4.3
Sensor Problem Solution
NETC1 RST1
NETC1 RST2
Network protocol
converter: reminder to
reboot the module. After
replacing a network
protocol converter and
configuring its settings for
the first time, the module
must be rebooted for the
settings to take effect.
Reboot the module.
Pail Full
Pail has filled with disposed
secondary tubes.
Refer to Empty the Defective Secondary Tube Container .
PM001 ERR
Motor error.
1. Place the module in
Manual
mode.
2. Confirm that nothing interferes with the movement of the
loading arm.
3. Place the module in Auto
mode to resume operation.
Note
If the error still occurs, reboot the module, then
place it in Auto mode to resume operation.
PM001 HOM
Error generated while the
arm was moving to the
home position.
1. Place the module in Manual
mode.
2. Confirm that nothing interferes with the movement of the
rotating table.
3. Place the module in Auto
mode to resume operation.
PM001 JOG
Home sensor detection
error at the rotating table.
1. Confirm that the motor rotates counterclockwise towards
the secondary container transfer position and the Home
Sensor works correctly.
2. Place the module in Auto
mode to resume operation.
PM001 LIM
The current register setting
forced the arm to move
beyond the allowable limit
position.
1. Place the module in Manual
mode.
2. Place the module in Auto
mode to resume operation.
3. If the error still occurs, contact your Beckman Coulter
representative.
PM001 POS
Rotating table position
error.
1. Place the module in Manual
mode.
2. Confirm that nothing interferes with the movement of the
rotating table.
3. Place the module in Auto
mode to resume operation.
Troubleshooting
Error Code Tables
4
B31449AE
4-9