Beckman Coulter Power Express Aliquot, Instructions For Use Manual

Page: 60 / 122

2
Find the sample ID of the primary sample, at the Line Control, select System Setup >
Aliquotting Sample ID .
The system displays sample IDs. Arm #1 is associated with the right Aliquot Nozzle if
viewed from the front of the Aliquot component. Arm #2 is the left Aliquot Nozzle.
Select Manual and OK to place the module in Manual mode.
3
Move the aliquot tip nozzles toward the back of the module with Aliquot mode 32 as
follows:
a. Select
Maintenance on the control panel of the Aliquotter.
b. Select the number field to display the onscreen keyboard.
c. Enter code 32 and select
Enter twice on the control panel.
d. If TIP ERR 12, TIP ERR 13, or TIP ERR 23 occurs, select
Clear and OK on the
control panel. If the Clear option is not displayed, dispose of the aliquot tip down
the disposal chute.
4
Open the rear doors of the Aliquotter.
5
Collect the sample by placing a 2mL sample cup below aliquot tip #1 and then pulling
the aliquot tip downward. Repeat for nozzle #2.
6
After collecting the sample, re-attach the aliquot tip to the nozzle.
7
Close the Aliquotter rear safety shield doors.
8
Perform the Aliquotter and Labeler Lane Clear procedure.
Error Recovery Procedures
Aliquot Module Error Recovery Procedures
3-20
B31449AE