Beckman Coulter Power Express Aliquot, Instructions For Use Manual

Page: 32 / 122

Check the Label Supply
1
Pull out the label assembly drawer at the front of the Labeler. Refer to Figure 2.1
Aliquot Module Labeler .
Note
When you open the label assembly drawer, the Labeler pauses and the control
panel turns yellow.
Figure 2.1 Aliquot Module Labeler
1. Aliquot Sample Tube Supply Bin 2. Label Assembly Drawer
2
Confirm that the label roll has a sufficient supply of labels for the run.
To replace a roll of labels, refer to
Replace the Roll of Labels in the Labeler .
3
Push the label assembly drawer back to its original position.
4
Select Restart to resume operation.
Power Express Aliquot Module Procedures
Check the Label Supply
2-2
B31449AE