Barco XHD-200, User Manual

Page: 207 / 287

8.4.1 Timeline playback control mode
This feature allows you the control and playback of timelines from a DMX board, and
it is available for both 2D and 3D projects. This feature is disabled by default and must
be activated by clicking on the
Enable External Control check box in the Properties
pane of a Timeline. See Figure 8.13, “Enable External Control check box” .
Figure 8.13. Enable External Control check box
Once external control is enabled, you must specify the DMX universe and channel to
which the Timeline listens to in order to be controlled.
Table 8.2, “Timeline control protocol”
describes the simple protocol to control the Timeline.
Values Default Parameter Bits Channel
0 Playmode 8 1 0 = stop
1 = play
2 = pause
3 = seek and play
4 = seek and pause
– 0 Cue ID major 8 2
– 0 Cue ID minor 8 3
– 0 Cue ID patch 8 4
Table 8.2. Timeline control protocol
Barco Pn: 60600320 204
Section 8: Features Barco Media Server XHD-Series User Guide