Barco XHD-200, User Manual

Page: 50 / 287

Figure 2.15. Rufus utility
a. Note the Selected USB Disk in the Device filed.
b. Note that Create a bootable disk using is checked,
and ISO Image is selected.
c.
Click the “CD” button ( ) to point Rufus to the
source of the ISO that was stored.
This ISO is applied to the USB System Restore drive.
d. The File system and Cluster size may be different from
the defaults shown in
Figure 2.15, “Rufus utility” , be-
cause Rufus reads this information from the ISO file.
5. Click Start .
Note
The USB System Restore drive (the selected disk) is formatted, and the ISO
file is copied to it. This takes from 10 to 30 minutes. When the status bar says
READY, the process is complete.
47 Barco Pn: 60600320
Barco Media Server XHD-Series User Guide Section 2: Installation