Barco XHD-200, User Manual

Page: 194 / 287

Click Target Creation Mode and place additional targets on the geo-
metry. These targets can then be moved the same way as the initially
created targets.
If you need to delete a target, select it and press the Del key.
Right clicking with the mouse temporarily shows an all-white image, to help with cal-
ibration.
Note
A minimum of six points must be set before Reverse Mapping can be calcu-
lated.

Tip
When choosing the calibration points, follow these simple tips to make the
calibration as efficient as possible:
• Avoid choosing points lying in the same depth, the more
depth amplitude you have for your points, the easier the
calibration will be.
• Do not add too many points. The more points you add, the
less influence each point has when being dragged. You
should be able to calibrate efficiently with six or seven points.
• A toolbar provides ways to globally change the perspective
without having to select or move points.
• Mouse shortcuts:
• Free-form—Shift + the right mouse button
( Shift +RMB) scales the view in a non-uniform
way.
• Orbit—The right mouse button (RMB) rotates
the view.
• Pan—The middle mouse button (MMB) pans
the point of view.
• Roll—Shift + the middle mouse button
( Shift +MMB) applies a roll to the view.
• Zoom—The mouse wheel zooms the view in
or out.
Reverse Mapping controls
When not enabled, the following options can be set.
Target Creation Mode:
Allows the creation of points by clicking in the Viewport
pane.
Show Toolbar:
Shows or hides the toolbar in the Viewport pane.
Point Snapping: Causes created points to "snap" to existing vertices.
Show Wireframe: Shows or hides the wireframes of the scene objects.
191 Barco Pn: 60600320
Barco Media Server XHD-Series User Guide Section 8: Features