Barco XHD-200, User Manual

Page: 35 / 287

2.4 Connections
Make the following connections to the rear panel of the Barco Media Server. Installations
may vary, having different requirements. The following connections are meant as ex-
amples.
2.4.1 Main connections
1. Connect a monitor to the DVI port labeled “Desktop.”
(DVI cable not included.)
2. Connect keyboard and mouse to USB 2.0 ports.
3. Optional —Connect the Ethernet cable from a router to one of the Ether-
net ports.
Note
If the server is to be connected to another server running
X-Agora Agents, connect the servers using Ethernet Port #1,
and connect the router using Ethernet Port #2.
The Ethernet port nearest to the power supply is Port #1,
and the other is Port #2.
4. Connect power cord.
2.4.2 Output, video capture, and genlock connections
XHD-400
Connect up to four outputs through the DisplayPort ports on the video output card. If
necessary, use the active DisplayPort-to-DVI adapters provided by Barco.
XHD-402
1. Connect up to four outputs through the DisplayPort ports on the video
output card.
If necessary, use the active DisplayPort-to-DVI adapters provided by
Barco.
2. Connect up to two inputs through the DVI ports on the video capture
card.
Barco Pn: 60600320 32
Section 2: Installation Barco Media Server XHD-Series User Guide