Barco XHD-200, User Manual

Page: 197 / 287

4. Repeat Steps 1 to 3 as needed to create the points and shapes that you
need.
To delete a point or a shape, select it and press the Del key.
5. Move the points and shapes until the projected image fits accurately
on the surface.
 Tips
If the image contains no empty regions, define a mosaic of
your whole image starting from the four corners, in order to
preserve continuity. •
• Keyboard shortcuts can help defining points and shapes
faster.
• Ctrl +click can be used to create points.
• The F key and the Del key can be used to
create and delete shapes.
• Shift +click can be used for multiple selection
and deselection.
Edge Warping controls
The Global section of the Calibration pane provides controls for displaying points and
shapes in the Viewport pane.
Show Wireframe: Toggles between showing or not showing the shape wireframes.
Show Points: Toggles between showing or not showing the points.
Reset:
Removes all points and shapes.
The Shapes section of the Calibration pane provides controls to create, delete, or modify
shapes.
Create New Shape (+): Creates a new shape from selected points.
You can also use the F key to create a new shape
from the selected points.
Delete Shape (×): Deletes the currently selected shapes.
You can also use the Del key to delete selected
shapes.
Move Shape Up (
↑
) or Down (
↓
): Moves a shape up or down in the list.
The position of a shape in the list corresponds to its
drawing order.
The Selected Point section of the Calibration pane provides controls to modify the
properties of a selected point.
Barco Pn: 60600320 194
Section 8: Features Barco Media Server XHD-Series User Guide