Barco XHD-200, User Manual

Page: 158 / 287

From left-to-right the Timeline playback and element-manipulation controls are:
Go to Start:
Moves the Playhead to the start of the Timeline.
Last Frame: Moves the Playhead to the last (previous) frame.
Play/Pause: Plays or pauses the Timeline.
Stop: Stops the Timeline.
Next Frame: Moves the Playhead to the next frame.
Go to End: Moves the Playhead to the end of the Timeline.
Snapping On/Off: Turns Snapping mode On or Off.
When in Snapping mode, elements on the Timeline can snap
to other elements. When dragging an element, a visual marker
indicates if snapping is possible. If snapping is possible, releas-
ing the element snaps it to the visual marker.
Align Left: Aligns two or more elements to the leftmost element.
Select the elements to be aligned and click this button to align
them.
Align Right: Aligns two or more elements to the rightmost element.
Select the elements to be aligned and click this button to align
them.
Same Width: Sets the length of two or more elements to that of the longest
selected element.
Select two or more elements and click on this button to set the
length of all selected elements to that of the longest element.
Add TimeCue: Adds a TimeCue at the position of the Playhead.
7.6.2 Manual time manipulation
Figure 7.23. Time editor
You can manually seek to a timestamp anywhere in a Timeline. The last digit in the
time editor references the frame, depending on the selected FPS of the Timeline. See
FPS in Timeline properties (p.168) .
7.6.3 Zooming
Figure 7.24. Zooming controls
155 Barco Pn: 60600320
Barco Media Server XHD-Series User Guide Section 7: Window menu panes