Technical data • Individual components
74
Automation PC 3100 user's manual V0.60
3.5.6 5AC901.IPLK-00
3.5.6.1 General information
Interface option 5AC901.IPLK-00 is equipped with 1 POWERLINK interface and 2 MB SRAM.
•
1x POWERLINK interface for managing or controlled node
•
2 MB SRAM
•
Compatible with the APC910/PPC900 and APC3100/PPC3100
Information:
When writing, reading or accessing the SRAM, "unaligned accesses" are not supported by the Avalon
bus (internal bus in the PCI Express core).
3.5.6.2 Order data
Model number
Short description
Figure
Interface options
5AC901.IPLK-00
Interface card - 1x POWERLINK interface - 2 MB SRAM - For
APC910/PPC900/APC3100/PPC3100
Table 87: 5AC901.IPLK-00 - Order data
3.5.6.3 Technical data
Information:
The following specifications, properties and limit values apply only to this accessory and may deviate
from those that apply to the complete system. For the complete system in which this accessory is
installed, for example, the data specified for that complete system applies.
Model number
5AC901.IPLK-00
General information
B&R ID code
0xE025
Certifications
CE
Yes
UL
cULus E115267
Industrial control equipment
HazLoc
cULus HazLoc E180196
Industrial control equipment
for hazardous locations
Class I, Division 2, Groups ABCD, T3C
1)
Controller
SRAM
Size
2 MB
Battery-backed
Yes
Remanent variables in power failure mode
256 kB
(e.g. for Automation Runtime, see Automation Help)
Interfaces
POWERLINK
Quantity
1
Transfer
100BASE-TX
Type
Type 4
2)
Design
Shielded RJ45
Transfer rate
100 Mbit/s
Cable length
Max. 100 m between two stations (segment length)
Electrical characteristics
Power consumption
1.5 W
Operating conditions
Pollution degree per EN 61131-2
Pollution degree 2
Environmental conditions
Temperature
Operation
0 to 55°C
3)
Storage
-20 to 60°C
Transport
-20 to 60°C
Table 88: 5AC901.IPLK-00 - Technical data
