Accessories • Power connectors
132
Automation PC 3100 user's manual V0.60
Chapter 6 • Accessories
The functionality of the following accessories has been tested and approved by B&R in connection with this device.
Nevertheless, there may be possible limitations with regard to operation with other individual components as part
of the complete system. For the operation of the complete system, all individual specifications of the components
must be observed.
All components listed in this manual have been subjected to extensive system and compatibility testing and ap-
proved accordingly. B&R cannot guarantee the functionality of non-approved accessories.
1 Power connectors
1.1 0TB103.9x
1.1.1 General information
This 1-row, 3-pin 0TB103 terminal block is used for the power supply.
1.1.2 Order data
Model number
Short description
Figure
Accessories
0TB103.9
Connector 24 VDC - 3-pin female - Screw clamp terminal block
3.31 mm²
0TB103.91
Connector 24 VDC - 3-pin female - Cage clamp terminal block
3.31 mm²
Table 127: 0TB103.9, 0TB103.91 - Order data
1.1.3 Technical data
Information:
The following specifications, properties and limit values apply only to this accessory and may deviate
from those that apply to the complete system. For the complete system in which this accessory is
installed, for example, the data specified for that complete system applies.
Model number
0TB103.9
0TB103.91
General information
Certification
CE
Yes
UL
cULus E115267
Industrial control equipment
HazLoc
cULus HazLoc E180196
Industrial control equipment
for hazardous locations
Class I, Division 2, Groups ABCD, T4
1)
DNV GL
Temperature:
B
(0 - 55°C)
Humidity:
B
(up to 100%)
Vibration:
A
(0.7 g)
EMC:
B
(Bridge and open deck)
Terminal block
Note
Protected against vibration by the screw flange
Nominal values per UL
Number of pins
3 (female)
Type of terminal block
Screw clamp terminal block
Cage clamp terminal block
2)
Cable type
Only copper wires (no aluminum wires!)
Distance between contacts
5.08 mm
Table 128: 0TB103.9, 0TB103.91 - Technical data
