Software • Windows 10 IoT Enterprise 2016 LTSB
112
Automation PC 3100 user's manual V0.60
Function
Windows 10 IoT Enterprise 2016 LTSB
Assigned access
Configurable
AppLocker
Configurable
Shell Launcher
Configurable
Unified Write Filter
✓
Keyboard Filter
Configurable
Table 121: Features with Windows 10 IoT Enterprise 2016 LTSB.
1.5 Installation
B&R preinstalls Windows 10 IoT Enterprise 2016 LTSB on a suitable data storage device (64-bit: minimum 20
GB). When switched on for the first time, the system runs through the out-of-box experience (OOBE), which allows
different settings to be made (e.g. language, region, keyboard layout, computer name, username, etc.).
Windows 10 IoT Enterprise 2016 LTSB can be installed on APC3100 and PPC3100 devices in UEFI or legacy
BIOS mode. In UEFI mode, the data storage device containing the Windows partition is formatted with a GUID
Partition Table (GPT) file system. For other drives, it is possible to use either the GPT or Master Boot Record
(MBR) file format. A GPT drive can have up to 128 partitions.
Note when backing up or restoring the installation that the GPT file system must be supported by the software
being used.
1.6 Drivers
The operating system contains all drivers necessary for operation. If an older driver version is installed, the latest
version of it can be downloaded and installed from the B&R website (
). Note that the Unified
Write Filter (UWF) must be disabled for this.
Information:
Only download necessary drivers from the B&R website, not from vendor websites.
1.7 Activation
Windows 10 IoT Enterprise 2016 LTSB must be activated like its predecessor, Windows 10 IoT Enterprise 2015
LTSB. This has already been done at B&R.
The activation status can be checked in the Control Panel:
