Accessories • Cables
146
Automation PC 3100 user's manual V0.60
5.3 SDL cables with 45° male connector
5.3.1 5CASDL.0xxx-01
5.3.1.1 General information
5CASDL.0xxx-01 SDL cables with 45° connector are designed for use in fixed installations.
Caution!
The cable is only permitted to be connected or disconnected when the power is switched off.
5.3.1.2 Order data
Model number
Short description
Figure
SDL cables 45° connection
5CASDL.0018-01
SDL cable - 45 degree connector - 1.8 m
5CASDL.0050-01
SDL cable - 45 degree connector - 5 m
5CASDL.0100-01
SDL cable - 45 degree connector - 10 m
5CASDL.0150-01
SDL cable - 45 degree connector - 15 m
Table 141: 5CASDL.0018-01, 5CASDL.0050-01, 5CASDL.0100-01, 5CASDL.0150-01 - Order data
5.3.1.3 Technical data
Information:
The following specifications, properties and limit values apply only to this accessory and may deviate
from those that apply to the complete system. For the complete system in which this accessory is
installed, for example, the data specified for that complete system applies.
Model number
5CASDL.0018-01
5CASDL.0050-01
5CASDL.0100-01
5CASDL.0150-01
General information
Certification
CE
Yes
UL
cULus E115267
Industrial control equipment
HazLoc
cULus HazLoc E180196
Industrial control equipment
for hazardous locations
Class I, Division 2, Groups ABCD, T4
1)
cULus HazLoc E180196
Industrial control equipment
for hazardous locations
Class I, Division 2,
Groups ABCD, T4
DNV GL
Temperature:
B
(0 - 55°C)
Humidity:
B
(up to 100%)
Vibration:
A
(0.7 g)
EMC:
B
(Bridge and open deck)
2)
GOST-R
Yes
Cable construction
Wire cross section
28 AWG
24 AWG
Shield
Individual cable pairs, entire cable
Complete shielding
Tinned copper braiding, optical coverage >85%
Outer sheathing
Material
PVC
Color
Black
Connector
Type
2x DVI-D (24+1), male
Connection cycles
100
Contacts
Gold-plated
Mechanical protection
Metal cover with crimped strain relief
Locating screw tightening torque
Max. 0.5 Nm
Electrical characteristics
Conductor resistance
24 AWG
-
≤93 Ω/km
28 AWG
≤237 Ω/km
-
Insulation resistance
Min. 10 MΩ/km
Operating conditions
Degree of pollution in accordance with
EN 61131
Pollution degree 2
Mechanical characteristics
Dimensions
Length
1.8 m ±30 mm
5 m ±50 mm
10 m ±100 mm
15 m ±100 mm
Diameter
Max. 9 mm
Max. 11.5 mm
Table 142: 5CASDL.0018-01, 5CASDL.0050-01, 5CASDL.0100-01, 5CASDL.0150-01 - Technical data
