Accessories • Terminal block ready relay
134
Automation PC 3100 user's manual V0.60
2 Terminal block ready relay
2.1 0TB2104.8000
2.1.1 General information
This 1-row, 4-pin TB2104 terminal block is used for ready relay 5AC901.IRDY-00.
2.1.2 Order data
Model number
Short description
Figure
Terminal blocks
0TB2104.8000
Connector 24 VDC - 4-pin female - Screw clamp terminal block
2.5 mm²
Table 129: 0TB2104.8000 - Order data
2.1.3 Technical data
Information:
The following specifications, properties and limit values apply only to this accessory and may deviate
from those that apply to the complete system. For the complete system in which this accessory is
installed, for example, the data specified for that complete system applies.
Model number
0TB2104.8000
General information
Certification
CE
Yes
UL
cULus E115267
Industrial control equipment
Terminal block
Note
Nominal values according to UL
Number of pins
4 (female)
Type of terminal block
Screw clamp terminal block
Cable type
Only copper wires (no aluminum wires!)
Distance between contacts
5.08 mm
Connection cross section
AWG wire
26 to 14 AWG
Wire end sleeves with plastic covering
0.2 to 1.5 mm²
Solid wires
0.2 to 2.5 mm²
Fine strand wires
0.2 to 1.5 mm²
With wire end sleeves
0.2 to 1.5 mm²
Electrical characteristics
Nominal voltage
300 V
Nominal current
1)
10 A
Operating conditions
EN 61131 pollution degree
Pollution degree 2
Table 130: 0TB2104.8000 - Technical data
1)
The respective limit data of the IF option must be taken into account!
