Autonics AiCA Series, User Manual

Page: 81 / 131

10 Drive
© Copyright Reserved Autonics Co., Ltd. 81
10.1.5.3 Zero Point Home Search (home search method=2)
It operates home search by zero point (absolute coordinate=0) when there is no home
sensor, limit sensor.

Zero Point Home Search Drive
1st
Set the zero (absolute coordinate=0) as home.
For changing home position, use the position reset.
If changing zero position by I/O, move the zero to the desired position and supply
“RESET” signal and it resets.
When reset or resupplying power, the zero point is also reset.
2nd The set direction at “Home Search Direction” is ignored and it operates drive at the
set home direction.
3rd It starts drive with the set start drive speed at “Home Search Start Speed”, and it
operates acceleration drive with the set acceleration time at “Home Search
Acceleration Time”.
4th After acceleration drive is complete, it operates constant speed drive with the set
max. drive speed at “Home Search Max speed”.
5th When it is close to home, it decelerates with the set deceleration time at “Home
Search Deceleration Time” and it stops.
6th After finding home, “In-Position” signal utputs and the “INP. indicator (orange)”
turns ON.

At “Home Search Offset”, the other value except 0 is set, it moves for the setting value
with start drive speed, “In-Position” signal outputs, and the “INP. indicator (orange)”
turns ON.