Autonics AiCA Series, User Manual

Page: 32 / 131

4 Installation
32 © Copyright Reserved Autonics Co., Ltd.
4.2.4 Installation Conditions
Install the motor in a place that meets certain conditions specified below.
It may cause product damage if instructions are not following.
① The inner housing installed indoor
(This unit is manufactured and designed for attaching to equipment.
Install a ventilation device.)
② Within 0 to 50 ℃ (at non-freezing status) of ambient temperature
③ Within 20 to 85%RH (at non-dew status) of ambient humidity
④ The place without explosive, flammable and corrosive gas
⑤ The place without direct ray of light
⑥ The place where dust or metal scrap does not enter into the unit
⑦ The place without contact with water, oil, or other liquid
⑧ The place without contact with strong alkali or acid material
⑨ The place where easy heat dissipation could be made
⑩ The place where no continuous vibration or severe shock
⑪ The place with less salt content
⑫ The place with less electronic noise occurs by welding machine, motor, etc.
⑬ The place where radioactive substances and magnetic fields does not exist and is not in the
vacuum status