Autonics AiCA Series, User Manual

Page: 123 / 131

12 Driver Function
© Copyright Reserved Autonics Co., Ltd. 123
12.2.8 Position Override
Position override moves by changing the target position without stopping operation during
position mode.
The command must be executed before reacing the initial target position. When the initial
target is reached, subsequent position override commands are not executed.
The position value may change depending on the parameter ‘Resolution’ setting.
 If the position override operation is not available properly, the position override
warning occurs and the final target position is reached at the specified starting speed.
 For more information of operation refer to ‘10.2.3.1 Position Override’.