42
WT313A
WT315A
9. Remove the air filter housing; then remove the gaso-
line hose from the fuel rail.
WT402
10. Disconnect the injectors (A). Remove and retain the
cap screws (B) securing the fuel rail to the intake man-
ifold.
WT404A
WT400
NOTE: Plug the holes with paper towels to keep
contaminates from falling inside.
11. Remove the ISC connector (A), MAP/IAT connector
(B), and the TPS connector (C); then loosen the clamp
securing the throttle body to the intake manifold.
Leave it connected to the throttle cable and set the
throttle body off to the side.
WT397A
12. Remove the springs securing the exhaust pipe to the
muffler; then remove muffler.
WT295
13. Remove the cap screws securing the heat shield to the
exhaust pipe; then carefully remove the heat shield
leaving the oxygen (O2) sensor in the exhaust pipe.
