41
WT186A
5. Remove and retain the cap screws securing the inner
clutch cover
; then with the air outlet duct connected to
the inner clutch cover, remove the cover as an assem-
bly.
Account for the rubber O-rings on both sides of
the cover.
WT443A
WT442A
6. Remove the clamp on the breather tube and loosen the
air intake clamp.
WT405A
WT311A
NOTE: Removing the intake boot with air box will
aid in installation.
7. Loosen the throttle body clamp.
WT316A
8. Remove and discard the top “patch-lock” fasteners
securing the air box; then remove and retain the lower
air box cap screws and grommets.
AT THIS POINT
If the technician's objective is to service the left-side
components, no further disassembling is necessary.
Proceed to Servicing Left-Side Components in this
section.
