108
12. Cut the cable tie securing the actuator plug to the
frame; then disconnect the actuator.
WT504A
NOTE: Note the position of the cable ties for assem-
bly purposes.
13. Remove the cap screws and spacers securing the front
differential to the frame. Discard the nuts.
WT423A
14. Remove the clamp securing the boot on the output
shaft of the front differential.
WT422A
15. Pull the front differential forward until the driveshaft
splines are free from the differential.
WT502
16. Remove the differential from the vehicle from the left
side.
Disassembling Input Shaft
1. Using a T-40 torx wrench, remove the cap screws
securing the pinion housing.
GC004A
2. Using a rubber mallet, remove the housing. Account
for a gasket. Remove the fork, collar, and spring. Note
the location of all the components for assembling pur-
poses.
GC015
