151
FX047
12. Remove the piston assembly; then remove the com-
pression valve stack and cable tie it together.
13. Remove the rubber washer, bearing assembly, bearing
cap, bumper, and washer.
FX044
FX043
14. Use Gas Shock Rod/Body Clamping Tool to secure
the shaft; then apply sufficient heat to the eyelet to
break the thread lock bond between the shaft and eye-
let.
FX042
FX041
15. Using a small pick, remove all seals and O-rings from
the bearing cap and bearing assembly. If a bearing is
required in the bearing assembly, replace the bearing
assembly.
FX040
FX039
