74
WT410A
WT399B
10. Connect the coolant return hose (A), the coolant out-
put hose (B), and the thermostat bypass hose (C).
Secure them with the hose clamps and connect the
ECT sensor (D).
WT411A
11. Install the coil bracket to the frame and tighten securely.
Install the spark plug caps (A); then connect the coil
connectors (B) and the cam position sensor (C).
WT396A
12. Remove the three cap screws from the PTO side of the
engine and install the clips securing the starter cable
and the gasline hose. Tighten the cap screws to 9 ft-lb.
Install the starter cable on the starter and tighten
securely.
WT414A
13. With the two gaskets in place, install the exhaust pipe.
Tighten to 8 ft-lb.
WT406A
WT398A
14. Carefully thread the oxygen (O2) sensor plug in
through the heat shield. Install the heat shield onto the
exhaust pipe and tighten to 10 ft-lb. Connect the oxy-
gen (O2) sensor.
